Skip to main content

RRAS service stops when APC Smart UPS in battery mode

More
18 years 3 months ago #15958 by sujo
We are using SBS 2003 with 2 NIC card, one for LAN and other for Internet (connected to Hardware Router).

RRAS works as LAN router. When power goes off, UPS starts running in battery mode. During that time RRAS service stops.
More
18 years 3 months ago #16328 by Smurf
Is the rest of your infrastructure on a UPS ? i.e. If your interface that the RRAS is utilising ends up being disconnected because the switch/router has powered off, could this not cause the issue ?

Also we had some issues with the UPS Software slowing down our server (100% CPU utilisation), this was caused because the version of the UPS Software from APC utilised a certificate and the certificate expired. We had to install the latest version to get around this one, this could also be an avenue worth persuing also.

Hope it helps

Cheers

Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
Time to create page: 0.133 seconds