Skip to main content

Problem with Knoppix :-(

More
19 years 9 months ago #7385 by aminos
Hi
I have a Knoppix lice CD but when i boot it , all i get is :

enabling DMA accelaration for hda ----> name of my HD
enabling DMA accelaration for hdb
> my CD-rom
.....
Looking for cd-rom in hda
.....

can't find Knoppix filesystem sorry
dropping you to very limited shell
press reset button to quit

knoppix #

what's going on ?? i don't know ???????
is it a hardware problem ?

please help
Thanks
More
19 years 9 months ago #7388 by cybersorcerer
Try tinkering with boot options that you can pass into the kernel. I had conflicts with my DMA enabled drive and to fix it I passed the "ide=nodma" option into the boot sequence and I was able to boot knoppix correctly.

"He who breaks something to find out what it is, has left the path of wisdom."

Gandalf the Grey
More
19 years 9 months ago #7394 by aminos
Replied by aminos on topic the solution
Hi
Thanks for your reply, but i found the solution :
at boot #knoppix noscsi nodma
or
# falisafe

but i have another problem, i think it's due to my network card

when it reashed the message :
Network device etho detected, DHCP broadcasting for IP
after that nothing happened
i want to know how to skip my Network card detection ?

thanks for all
More
19 years 4 months ago #9255 by sahirh
Replied by sahirh on topic Re: Problem with Knoppix :-(
try just pressing CTRL C at the DHCP line... it should escape that.. either way it doesn't matter too much, if you don't have DHCP, the DHCP will fail and you will be able to manually configure your network card.

Cheers,

Sahir Hidayatullah.
Firewall.cx Staff - Associate Editor & Security Advisor
tftfotw.blogspot.com
More
19 years 4 months ago #9282 by ping
Replied by ping on topic Re: Problem with Knoppix :-(
I also have some probleme wiht my knoppix live CD. Well it boots ok but when the desktop is loading it displays following message :

[code:1]Not enough memory to start KDE! (At least 82 mb required)using TWM window manager instead ,
Caution : Not all programs in the left mouse-menu will work here!
[/code:1]

It also displays the shell window which has this prompt

[code:1]knoppix@ttype0[knoppix]$[/code:1]

Now i have one Pentium IV 1.7 Gz. wiht 128Mb ram. In the menuals of the Cd i read that to start it in GUI mode i requiere atleast 82 Mb RAM. I have already 128 Mb.

What could be the possibel Issue?

The greatest pleasure in life is doing what people say you can not do..!!
More
19 years 4 months ago #9283 by cybersorcerer
Remember that knoppix uses a RAM disk to store the operating system in to mimic a live environment. When you subtract that from your available memory it is probably < 82 MB which is probably why it is blasting that error at you.

"He who breaks something to find out what it is, has left the path of wisdom."

Gandalf the Grey
Time to create page: 0.133 seconds