- Posts: 10
- Thank you received: 0
frame relay and RIP
14 years 8 months ago #33864
by sam4sg
frame relay and RIP was created by sam4sg
Hi Guys,
My very first post, so please correct me if this is not the right forum to post and move it to the appropriate forum.
I am trying to configure 3 routers on frame relay and run RIP over them. I am unable to ping from one router to another.
I can't seem to find the attach file link here, so here is the uploaded network file in packet tracer format:
files.ww.com/files/65710.html
Please check the network and let me know what i am doing wrong or missing.
Thanks,
Sam
My very first post, so please correct me if this is not the right forum to post and move it to the appropriate forum.
I am trying to configure 3 routers on frame relay and run RIP over them. I am unable to ping from one router to another.
I can't seem to find the attach file link here, so here is the uploaded network file in packet tracer format:
files.ww.com/files/65710.html
Please check the network and let me know what i am doing wrong or missing.
Thanks,
Sam
14 years 8 months ago #33866
by sam4sg
Replied by sam4sg on topic Re: frame relay and RIP
Hi.
Figured out myself.
I was missing to set the clock rate on the interface.
After setting clock rate 64000 on all, it started to work.
Thanks for looking.
Figured out myself.
I was missing to set the clock rate on the interface.
After setting clock rate 64000 on all, it started to work.
Thanks for looking.
14 years 8 months ago #33874
by Losh
~ Networking :- Just when u think its starting to make sense......... ~
____________________________________________
CCNA, CCNP, CCNA Security, JNCIA, APDS, CISA
Replied by Losh on topic Re: frame relay and RIP
Thats the spirit!
~ Networking :- Just when u think its starting to make sense......... ~
____________________________________________
CCNA, CCNP, CCNA Security, JNCIA, APDS, CISA
Time to create page: 0.116 seconds