Skip to main content

Regarding switch

More
14 years 9 months ago #33782 by dat
Regarding switch was created by dat
How to change L2 as L3 switch? what commands needs apply :?:
More
14 years 9 months ago #33788 by S0lo
Replied by S0lo on topic Re: Regarding switch
A normal L2 switch can NOT work as a L3 switch. However, a L3 switch can work as both L2 or L3 switch.

For example, if you have a Cisco L3 switch such as the 3550, you can enable/disable L3 switching using the ip routing / no ip routing command.
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
More
14 years 9 months ago #33804 by Chojin
Replied by Chojin on topic Re: Regarding switch
The switches that support L3 are so called MLS (Multi Layer Switches).

Also your IOS is of importance if your switch can support routing protocols.

You can check the feature navigator of cisco for your switch type.
CCNA / CCNP / CCNA - Security / CCIP / Prince2 / Checkpoint CCSA
Time to create page: 0.116 seconds