Skip to main content

Network Programming (route-map)

  • gagamboy
  • Topic Author
  • Visitor
  • Visitor
16 years 1 month ago #28132 by gagamboy
Network Programming (route-map) was created by gagamboy
Hi Guys,

I am using Cisco 6500, I have problem on how can I filter traffic on this Core Switch.

Like for example:
If this packet's destination is 192.168.1.3 and source is 10.10.10.3 then go to this interface.

Or If this packet's destination is 192.168.1.3 and source is 10.10.10.3 then go to this interface and comeback to this interface.


I believe I can use route-map for this but I donot know how to implement it.

Suggestions are all welcome and thanks in advance. :D

Cheers!
Gagamboy
More
16 years 1 month ago #28154 by S0lo

Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
Time to create page: 0.123 seconds