Skip to main content

a question about Collision Domain

More
18 years 2 months ago #16692 by ccnx
Hi guy

I have been puzzling with problem of collision domain, whenever i need to deal with the caculation of collision domain on any designed network, i must not work out a correct answer!!!!

is there any one can help me out ??

many thanks[/img][/list]
More
18 years 2 months ago #16694 by TheBishop
I'm not sure you'll ever need to calculate the extent of a collision domain but there are rules. If you stick to the Ethernet design rules for the particular medium and speed you're using plus things like the 5:4:3 rule you won't have a problem
More
18 years 2 months ago #16698 by Smurf
5:4:3 ? Whats that then ?

Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
More
18 years 2 months ago #16701 by Arani
Replied by Arani on topic 5:4:3 rule
5-4-3 Rule is a rule of creating ethernet segments

This above rules have lead to a simplified procedure for creating multi-segment Ethernet networks called the 5-4-3 rule. In the 5-4-3 rule, a total of five segments can exist connected by four repeaters as long as no more than three are bus segments. This is a very simple rule and it does not address the three, two or one repeater configuration. The rule also does not address the maximum allowable segment length under the varying conditions. In general, fiber segments are limited when using multiple repeaters.

Picking pebbles on the shore of the networking ocean
More
18 years 2 months ago #16729 by Smurf
Hehe, thought thats what TheBishop meant. Takes me back to the days of BNC :lol:

Wayne Murphy
Firewall.cx Team Member
www.firewall.cx

Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
Time to create page: 0.125 seconds