- Posts: 8
- Thank you received: 0
configuring a Tftp server on cisco router
19 years 1 week ago #12046
by gleeb
configuring a Tftp server on cisco router was created by gleeb
i need to configure a Tftp server on a cisco router. someo0ne please help me out with it...
its a 2500 series.
thank you.
its a 2500 series.
thank you.
19 years 1 week ago #12049
by DaLight
Replied by DaLight on topic Re: configuring a Tftp server on cisco router
Welcome to firewall.cx, gleeb. Check out this
thread
.
19 years 1 week ago #12050
by gleeb
Replied by gleeb on topic thank you.
but i ment more of making the cisco router the Tftp server.
so i can upload configuration files to it. and download from it....
where the configuration files would be stored in flash.
i hear theres no way to do it... it works only for downloading files not for uploading... if you want to make another file that can be downloaded from your router you ither need to transfer it fro a real tftp server or download it from another router...
correct me if i am wrong.
so i can upload configuration files to it. and download from it....
where the configuration files would be stored in flash.
i hear theres no way to do it... it works only for downloading files not for uploading... if you want to make another file that can be downloaded from your router you ither need to transfer it fro a real tftp server or download it from another router...
correct me if i am wrong.
19 years 1 week ago #12130
by tiamat
Replied by tiamat on topic Re: configuring a Tftp server on cisco router
You may be able to allow tftp uploading to a flash partition that is in read/write mode, but since a 2500's max flash is only 16 megs, and you'd probably have to partition it into two 8 meg chunks, you'd have to be running some really old IOS just to be able to fit it in 8 megs. Perhaps I'll try it on my router if I get some spare time. (wouldn't ya know it, I just re-imaged my router from two 8 meg partitions to a single 16 meg not long ago)
19 years 1 week ago #12133
by tiamat
Replied by tiamat on topic Re: configuring a Tftp server on cisco router
ok, so I had some spare time.... it doesn't look like it's possible. I've got my 2514 setup with two 8 meg flash partitions, IOS on partition 1 (obviously) but I can only seem to serve images to other tftp clients.
I've tried as many iterations of this global config command as possible:
tftp-server flash:2:
and even though that partition is in read/write, I just get an access denied message when I try to do PUTs to the router:
client:
Transfering file (whatever file I choose) to server in octet mode...
Packet will be sent. len=52, opcode=2
Packet received. len=18, opcode=5
Error occurred during the file transfer (Error code = 2):
Access denied
router:
(with tftp packet debugging on)
TFTP: Server request for port 2753, socket_id 0x17B3A8
TFTP: write request from host 172.x.x.x(2753) via Ethernet0
TFTP: Sending error 2 Access denied
I've tried as many iterations of this global config command as possible:
tftp-server flash:2:
and even though that partition is in read/write, I just get an access denied message when I try to do PUTs to the router:
client:
Transfering file (whatever file I choose) to server in octet mode...
Packet will be sent. len=52, opcode=2
Packet received. len=18, opcode=5
Error occurred during the file transfer (Error code = 2):
Access denied
router:
(with tftp packet debugging on)
TFTP: Server request for port 2753, socket_id 0x17B3A8
TFTP: write request from host 172.x.x.x(2753) via Ethernet0
TFTP: Sending error 2 Access denied
Time to create page: 0.134 seconds