Skip to main content

ASA 5505 and 5520 Site to Site Config Problems

More
15 years 3 months ago #31811 by sparkattack
ASA 5505 and 5520 Site to Site Config Problems was created by sparkattack
I have a site to site, 5505 connected to a 5520 and I am trying to get the phone traffic through. The phone is showing as up in my phone system and is seraching for the server so that leads me to believe that traffic is not making it back. This is the error that I keep on seeing.

Failed to locate egress interface for UDP from PORTAL:fe80::a535:a5c7:a96f:1252/546 to ff02::1:2/547

portmap translation creation failed for udp src inside:192.168.1.2/58995 dst PORTAL:192.168.1.3/161[/img]
More
15 years 3 months ago #31828 by r0nni3
Replied by r0nni3 on topic Re: ASA 5505 and 5520 Site to Site Config Problems
probally a problem with your no NAT rules. could you post the config so i can check ?
Currently working as Cisco Engineer at Neon-Networking.

Certifications:
CCNA - Have it
CCNA Security - Have it
CCSP - Almost!!!!
CCIE Security - Not so far away dream
More
15 years 3 months ago #31831 by obelisk
Replied by obelisk on topic Re: ASA 5505 and 5520 Site to Site Config Problems
Do you have IPsec tunnel between to locations?

I have a site to site, 5505 connected to a 5520 and I am trying to get the phone traffic through. The phone is showing as up in my phone system and is seraching for the server so that leads me to believe that traffic is not making it back. This is the error that I keep on seeing.

Failed to locate egress interface for UDP from PORTAL:fe80::a535:a5c7:a96f:1252/546 to ff02::1:2/547

portmap translation creation failed for udp src inside:192.168.1.2/58995 dst PORTAL:192.168.1.3/161[/img]

Time to create page: 0.119 seconds