Skip to main content

Cannot access Router IP on FE0/0 from internal switch

More
15 years 8 months ago #29508 by tomcoombs
Cannot access Router IP on FE0/0 from internal switch was created by tomcoombs
Please excuse my (probably) basic question.

I have a 2811, with a 9 port POE switch fitted internally. I have connected a variety of devices to the switch and all route/communicate correctly. (Shows as FastEthernet0/1/0 thru 8)

I have connected a patch cable between FastEthernet0/0 and the switch, to enable network configuration of the router from another switch connected device.

The ports come to the UPSTATE but I cannot ping the "router" address.

I suspect this is a vlan thing, but everythign is on the default vlan (1).

Any tips?
More
15 years 8 months ago #29540 by Chojin
Replied by Chojin on topic Re: Cannot access Router IP on FE0/0 from internal switch
What IP addresses are you using?
Also give the subnets.

How did you configure the router IP address?

Regards,
Chojin (Ferry)
CCNA / CCNP / CCNA - Security / CCIP / Prince2 / Checkpoint CCSA
More
15 years 8 months ago #29541 by S0lo
Replied by S0lo on topic Re: Cannot access Router IP on FE0/0 from internal switch
Posting both configs can help us help you.
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
More
15 years 8 months ago #29542 by Chojin
Replied by Chojin on topic Re: Cannot access Router IP on FE0/0 from internal switch

Posting both configs can help us help you.


Isn't that a quote from the army? :)
CCNA / CCNP / CCNA - Security / CCIP / Prince2 / Checkpoint CCSA
More
15 years 8 months ago #29591 by S0lo
Replied by S0lo on topic Re: Cannot access Router IP on FE0/0 from internal switch

Posting both configs can help us help you.


Isn't that a quote from the army? :)


;)
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
Time to create page: 0.129 seconds