How can I get IPs from PIX 501 with unknown enable password?

Hi
I was given an older PIX 501 and can console in no problem. Need to TFTP the password reset bin file but cant seem to figure out how to get the IPs from PIX as "show ip" wont work until enable password is reset. Is is there another way to use "show ip"command or get IPs
Mostly self teaching here so thanks in advance

You shouldn't need to list the IP Addresses on the interface as the password recovery procedure goes through assigning an ip address.

www.cisco.com/warp/public/110/34.shtml

The link says to use the address command to specify the IP address of the PIX Firewall's interface
How do I get that?

Thats refering to the address you want to assign to that interface. It needs to be an address thats on the same subnet as your tftp server.