- Posts: 7
- Thank you received: 0
ISA 2004 and 3 NICs
- YemenDomain
- Topic Author
- Offline
- New Member
Less
More
18 years 1 week ago #18027
by YemenDomain
B.Sc (Computer science),
Passed: 270-70 & 270-90
working on: 270-91 & CCNA
********Never hisitate asking. Not everyone knows. Seek Learning*********
ISA 2004 and 3 NICs was created by YemenDomain
my question is not direct as i don't know what should i ask to get an answer. i manage verywell my ISA 2004 using 2 NIC (Internal & External). no problems but now this is the case, please try to visualize the case:
I have and ADSL Router for Internet.
Local LAN, and
another LAN behind a frame relay routed path. (branch office).
so i brought this server 2003 machine with ISA 2004 with 3 NICs. 1st is getting the internet from the ADSL router. 2nd is for my LAN (main office LAN) and 3rd is for the Branch office LAN.
Local network ip is 200.100.0.0
Internet IP is (some IP) (Dynamic)
branch network is 172.16.1.0
how should i configure the ISA to allow branch office to access the internet. i would like to add that i configured the ISA once using the edge module and another using the three legged module. please advice.
Note: how can i add an image to this post??? i want to draw and post the toplogy drawing...!
I have and ADSL Router for Internet.
Local LAN, and
another LAN behind a frame relay routed path. (branch office).
so i brought this server 2003 machine with ISA 2004 with 3 NICs. 1st is getting the internet from the ADSL router. 2nd is for my LAN (main office LAN) and 3rd is for the Branch office LAN.
Local network ip is 200.100.0.0
Internet IP is (some IP) (Dynamic)
branch network is 172.16.1.0
how should i configure the ISA to allow branch office to access the internet. i would like to add that i configured the ISA once using the edge module and another using the three legged module. please advice.
Note: how can i add an image to this post??? i want to draw and post the toplogy drawing...!
B.Sc (Computer science),
Passed: 270-70 & 270-90
working on: 270-91 & CCNA
********Never hisitate asking. Not everyone knows. Seek Learning*********
18 years 1 week ago #18031
by Smurf
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx
Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
Replied by Smurf on topic Re: ISA 2004 and 3 NICs
Hi,
In answer to posting an image, please see this thread which asked the same question www.firewall.cx/ftopict-3697.html
Now, in answer to the ISA question. There is a template that there to setup a 3-Leg Firewall however this may not be what you are looking for as it sets up a perimeter network on one of the network legs www.microsoft.com/technet/isa/2004/help/...mplate.mspx?mfr=true
If memory serves;
It may be easier to get the two NIC one working first, define the external and the Internal using the template. Once this is done, configure the Branch office, defining an ip range for it also. THen you need to setup relationships between the different networks and what you want to do.
You would end up with relationships like this;
Internal - Outside --> NAT
Branch - Outside --> NAT
Internal - Branch --> Routing
If you require more details then please let me know. I may try and setup a test ISA as i may have missed some steps out as its been a while since i configured one. I'll ask my collegue at work to just run through this also.
Cheers
In answer to posting an image, please see this thread which asked the same question www.firewall.cx/ftopict-3697.html
Now, in answer to the ISA question. There is a template that there to setup a 3-Leg Firewall however this may not be what you are looking for as it sets up a perimeter network on one of the network legs www.microsoft.com/technet/isa/2004/help/...mplate.mspx?mfr=true
If memory serves;
It may be easier to get the two NIC one working first, define the external and the Internal using the template. Once this is done, configure the Branch office, defining an ip range for it also. THen you need to setup relationships between the different networks and what you want to do.
You would end up with relationships like this;
Internal - Outside --> NAT
Branch - Outside --> NAT
Internal - Branch --> Routing
If you require more details then please let me know. I may try and setup a test ISA as i may have missed some steps out as its been a while since i configured one. I'll ask my collegue at work to just run through this also.
Cheers
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx
Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
18 years 1 week ago #18032
by Smurf
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx
Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
Replied by Smurf on topic Re: ISA 2004 and 3 NICs
Oops, also dont forget some rules to allow the traffic you want to go through
Wayne Murphy
Firewall.cx Team Member
www.firewall.cx
Now working for a Security Company called Sec-1 Ltd in the UK, for any
Penetration Testing work visit www.sec-1.com or PM me for details.
Time to create page: 0.117 seconds