- Posts: 15
- Thank you received: 0
CP Secure Client
18 years 6 months ago #15350
by eli2983
CP Secure Client was created by eli2983
Hi I'm trying to allow clients from the internet to access my LAN via the Check Point Firewall.I configured the remote office service, but after the client get's an IP address from the FW he cant update the Policy on the PC and the logs of the firewall are :
"..Message_info:Client's configuration is not verified .."
Can someone help please ?
10x
"..Message_info:Client's configuration is not verified .."
Can someone help please ?
10x
18 years 6 months ago #15364
by sahirh
Sahir Hidayatullah.
Firewall.cx Staff - Associate Editor & Security Advisor
tftfotw.blogspot.com
Replied by sahirh on topic Re: CP Secure Client
I would point you to
www.phoneboy.com
but it seems to be down right now.
We've got a couple of CP gurus around here as well so give it a couple of days, someone will pick this one up for sure.
Cheers,
We've got a couple of CP gurus around here as well so give it a couple of days, someone will pick this one up for sure.
Cheers,
Sahir Hidayatullah.
Firewall.cx Staff - Associate Editor & Security Advisor
tftfotw.blogspot.com
18 years 4 months ago #16130
by tiamat
Replied by tiamat on topic Re: CP Secure Client
well, i know this is an older post, but thought i'd pitch in anyway - the message you are getting indicates that you've got SCV (secure client verification) enabled, and that the client isn't meeting the criteria for being considered 'secure'. Depending on how you have it setup, that could be anything from not having a valid antivirus installed, to allowing ip forwarding, etc.
First thing to do is to disable your SCV checking and go from there.
First thing to do is to disable your SCV checking and go from there.
Time to create page: 0.127 seconds