- Posts: 5
- Thank you received: 0
success with connecting to firewall, but...
18 years 5 months ago #14951
by rcpr
success with connecting to firewall, but... was created by rcpr
I am now able to connect my vpn client to our firewall (pix 506e) at the office. but that is all. i am connected, but i can't see anything on our network in "my network places". thus i can't map a drive within the network. it didn't prompt me for a windows logon...
any suggestions?
any suggestions?
18 years 5 months ago #14953
by TheBishop
Sounds like you have a link but can't route across it. Check you don't have the same IP network in use at both ends of the link and that you have the appropriate routing entries in place. You can do some basic checks by seeing if you can ping over the link and checking what you've got at the client end with ipconfig /all and route print
18 years 5 months ago #15039
by Bublitz
The Bublitz
Systems Admin
Hospice of the Red River Valley
Replied by Bublitz on topic Re: success with connecting to firewall, but...
Most firewalls you have to allow netbios traffic to see things in my network places.
Also ping across to the other network/office to a PC you know the ip to. If it pings back then add network drive with ip (or enable netbios traffic over vpn) \\X.X.X.X\(share name\ this way you dont need the computer name just the ip.
Im assuming your setting up a network drive to a server that the ip is static....
Also ping across to the other network/office to a PC you know the ip to. If it pings back then add network drive with ip (or enable netbios traffic over vpn) \\X.X.X.X\(share name\ this way you dont need the computer name just the ip.
Im assuming your setting up a network drive to a server that the ip is static....
The Bublitz
Systems Admin
Hospice of the Red River Valley
Time to create page: 0.122 seconds