Skip to main content

my internet is not working , expert pls check config below.

More
13 years 5 months ago #37086 by sais
this is the configuration for loadbalance (more3 speed) > sitch 3560 connect two port to wimax. then switch connected to router 800 series fastethernet4
fo-f3 used to ---to lan . but still am notworking ...


track command ?
switch 3560 conf iguratuion

track 2 rtr 2 reachability
!
track 3 rtr 3 reachability
interface FastEthernet0/1
description (( CONECTED TO THE FIRST WIMAX


interface FastEthernet0/2
description (( CONECTED TO SECOND WIMAX


interface FastEthernet0/3
description (( TO CISCO 881 INTERNET ROUTER ))
ip addr 10.10.10.5 255.255.255.252

ip route 0.0.0.0 0.0.0.0 FastEthernet0/1 track 2
ip route 0.0.0.0 0.0.0.0 FastEthernet0/2 track 3
.
.
.
router
the ....

int4
ip adress 10.10.10.6 255.255.255.252

int vlan 192.168.1.1 255.255.255.0

ip nat pool room 11.1.1.1 11.1.1.1 255.255.255.252
ip nat inside sourcelist 2 poo room overload
acc 192.168.1.0 0.0.0.255

. still am not getting internet

from router am ping switch to router......
Time to create page: 0.107 seconds