Setup an ASA 5505

Hi there, I am trying to set up the following: ADSL -> router with IP address 192.168.1.254 -> ASA 5505. Behind the ASA is my printer and computer and removable drives. I have tried the following config:

interface vlan1
ip address 192.168.32.1 255.255.255.0 (I had tried 192.168.1.1 with no success)
nameif inside

interface vlan 2
ip address 192.168.1.254 255.255.255.0
nameif outside

route outside 0.0.0.0 0.0.0.0 192.168.1.254

global (outside) 10 interface
nat (inside) 10 192.168.32.0 255.255.255.0

Does this look at all right?

Must vlan 2 point to my router IP or my isp ip?

Router IP since that's the next hop. Also, your vlan 2's interface IP address is the same as your router's IP address, therefore it needs to be changed.

Router IP since that's the next hop. Also, your vlan 2's interface IP address is the same as your router's IP address, therefore it needs to be changed.

Thanks for your reply. The vlan 2's interface IP is that the command:- route outside 0.0.0.0 0.0.0.0 192.168.1.254 ? If so should I change it to the ISP IP, i.e. route outside 0.0.0.0 0.0.0.0 xx.xx.139.224? Or is it:- nat (inside) 10 1xx.xx.139.224 255.255.255.248 ?

Should nat (inside) point to my router IP or my ISP IP?

Should I have my adsl router set up as a bridge?