Skip to main content

Can't ping between ASA 5510 interfaces

More
16 years 3 weeks ago - 11 years 9 months ago #27984 by sender4u
I'm trying to ping between my Cisco ASA5510's two interfaces. Can someone provide me with a bit of help ?
Last edit: 11 years 9 months ago by Chris.
More
16 years 3 weeks ago #27985 by Chris
Sender4u,

Welcome to Firewall.cx

Try adding the following two commands in global configuration mode and see if it makes a difference:

icmp permit any inside
icmp permit any outside


Cheers,

Chris Partsenidis.
Founder & Editor-in-Chief
www.Firewall.cx
More
16 years 3 weeks ago #27986 by sender4u
Cheers Chris Partsenidis,

I will try that....

Thanks.
Sender4u
More
16 years 2 weeks ago #27998 by sender4u
hi Chris Partsenidis,

I have tried what you mentioned, but still no luck..

can’t ping the outside interface from inside interface, packet tracer coming up the problem in inside (incoming ) access list, however I have permitted any to any.

Also when I try to access the internet from the computer connected to the inside interface following is the syslog.

Portmap translation creation failed for udp src inside 192.168.0.252/64185 dst management: xx.xx.82.242

Please could you help?

Thanks.
Sender4u
More
16 years 1 week ago #28100 by r0nni3
Could you post your config you have so far please ?




Ron.

Currently working as Cisco Engineer at Neon-Networking.

Certifications:
CCNA - Have it
CCNA Security - Have it
CCSP - Almost!!!!
CCIE Security - Not so far away dream
Time to create page: 0.129 seconds