- Posts: 67
- Thank you received: 0
Cisco devices Backup Issue
17 years 7 months ago #21344
by ramasamy
Cisco devices Backup Issue was created by ramasamy
Hi All,
I have to take Backup for around 50 devices daily. I have tried many free wares like Router Backup Administrator, RAT, Snarf etc... But it is not supporting SSH. Is there a free ware which supports SSH for taking backup :
Thanks in Advance..... :idea:
I have to take Backup for around 50 devices daily. I have tried many free wares like Router Backup Administrator, RAT, Snarf etc... But it is not supporting SSH. Is there a free ware which supports SSH for taking backup :
Thanks in Advance..... :idea:
- skepticals
- Offline
- Elite Member
Less
More
- Posts: 783
- Thank you received: 0
17 years 7 months ago #21378
by skepticals
Replied by skepticals on topic Backup
I ran across this:
www.geocities.com/billytk06/
I have not used it and I don't know if it will support your needs, but you can have a look...
www.geocities.com/billytk06/
I have not used it and I don't know if it will support your needs, but you can have a look...
17 years 7 months ago #21500
by lavage
Replied by lavage on topic Re: Cisco devices Backup Issue
Try this: Kiwi CatTools
support SSH
support SSH
- naveenkollipara
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 0
17 years 7 months ago #21579
by naveenkollipara
Thanks & Regards,
Naveen Kollipara.
Replied by naveenkollipara on topic Re: Cisco devices Backup Issue
Kiwi cattools free version supports only five devices. One good upcoming tool under development is ziptie.
ziptie.org
Thank you,
N Kollipara
ziptie.org
Thank you,
N Kollipara
Thanks & Regards,
Naveen Kollipara.
17 years 7 months ago #21603
by semper
James
www.securitygeek.net
Replied by semper on topic Re: Cisco devices Backup Issue
I wrote my own a couple years back with the previous company I worked for.
I used the Net::Telnet::Cisco Perl module, Linux, Crontab, and TFTP. It worked great. I used it on 200 switches.
I used the Net::Telnet::Cisco Perl module, Linux, Crontab, and TFTP. It worked great. I used it on 200 switches.
James
www.securitygeek.net
Time to create page: 0.146 seconds