help with boson simulation

For some reason i can not get the serverfarm router to ping the S0 interface on Floor 5's router can anyone tell me what the issue is.


serverfarm's serial 1 interface is connected to the FLoor 5 routers serial 1 interface.

serial farms interface serial 1 is 10.0.0.2/24
Floor 5 router's serial 1 interface is 10.0.0.1/24

Theese routers interfaces are able to ping each other. However Floor 5 has a second interface serial 0 in which serverfarm cannot ping.

I set a route from serverfarm ip route 10.5.0.0 255.255.255.0 10.0.0.1

Floor 5 routers serial interface 0 is 10.5.0.1

So im thinking the route goes from server farm to the 10.0.0.1 "floor 5 routers serial 1 interface then from there it should know to go to its serial 0 interface to the 10.5.0.0 subnet any suggestions ?

Can you ping Floor 5 S0 from Floor 5 it self ?

Note that even if the serial 0 is "no shutdown" it has to be connected to be up.

Hi Brandonh,

Can you pls check whether the Floor 5 ROuter's Serial0 interface is UP....?

I finally got it to work i had to connect the first router to the last router then add in all of the routes i believe i intered like 66 routes in all.