- Posts: 3
- Thank you received: 0
Outbound NAT
18 years 7 months ago #14093
by Navar
Outbound NAT was created by Navar
Hi Guys,
If I have a network for instance 192.168.0.0 255.255.255.0 and want say every 10th ip (ie. 192.168.0.10, 192.168.0.20, 192.168.0.30 etc) to go through a specific interface (Dialer0) for instance, how would I achieve this?
Thanks
If I have a network for instance 192.168.0.0 255.255.255.0 and want say every 10th ip (ie. 192.168.0.10, 192.168.0.20, 192.168.0.30 etc) to go through a specific interface (Dialer0) for instance, how would I achieve this?
Thanks
18 years 7 months ago #14117
by havohej
Replied by havohej on topic Re: Outbound NAT
dont know what use could you give it, but I could simply match with the host access list all the x.x.x.10, 20, 30, 40 ..... until 250 (of course too much time).
Dont know if there is another quickest solution.
Dont know if there is another quickest solution.
Time to create page: 0.120 seconds