how to connect 2 different IP Address

Hello guys,

I have problem in connecting 2 different IP Address.
I have 192.168.18.0/24 and 192.168.1.0/24 they are connected to DLINK 3326SRM Switch. How can I connect host computer from 192.168.18.0/24 to 192.168.1.0/24 and vice versa.

What will be the routing table in DLINK 3326SRM?

Thank you in advance.

They're two separate networks so you can't connect them via a switch. You'll have to use a router or reassign the addresses to be in the same network. I'm not familiar with the switch that you're using.

The switch is a layer 3 switch.

Is there any way to connect the two networks?

The switch is a layer 3 switch.

Is there any way to connect the two networks?

Sure there is if it is a layer 3. Not sure how to configure D-link's though, If you need the manual for this model, it's here: www.retrevo.com/support/D-link-DES-3326S...ual/id/420bh240/t/2/

If it's a layer 3 switch, assign the respective ports to different VLANs and assign IP addresses to the VLAN interface and you will have connectivity between the subnetworks. You need to set the default gateway on the PCs to the IP address of the VLAN interface.

Ooops :oops:, I said you needed RIP or OSPF, that is incorrect. Elohim is right. Don't know what got in my head!!